EX0103 - Clear float glass from Indonesia

The goods the subject of the application (the goods) are:

Clear float glass (CFG) in nominal thickness of 3 to 12 millimetres (mm).

The tolerances for each of these thicknesses are set out in the following table.

The goods have the following characteristics:

• transparent;
• flat; and
• rectangular or square in shape.

With respect to exports from Thailand only, CFG with edge working in the form of an ‘arris’, ‘rough arris’ or ‘seamed’ edge (removal of the sharp edges of the glass), on any number of sides or faces is the goods.

With the exception of the above reference to edge-worked glass from Thailand, glass with the following characteristics is not the goods the subject of the original notice:

• coated, coloured, tinted or opaque;
• absorbent, reflective or non-reflective layer;
• wired;
• bent, edge-worked, engraved, drilled, enamelled or otherwise worked;
• framed or fitted with other materials;
• toughened (tempered) or laminated;
• acid etched; or
• low iron.

Further information on the goods can be found in ADN 2025/028 below.