This page belongs to: Anti-Dumping Commission

645 - Interchangeable bolted clipping system clip heads from China

The goods the subject of the application (the goods) are: 

“Interchangeable bolted clipping system clip-heads, with galvanized or powder coating finish, in the size range 12 to 150 mm (i.e. 0.5 inch to 6 inch) diameter, with elongated emboss and square hole for interlocking coach bolt and nut.” 

Supporting physical appearance information 

This interchangeable bolted clipping system also ensures the linear alignment of the clip head with the bracket, not allowing for any movement when installed. The interchangeable bolted clipping system clip-heads (hereafter referred to as “interchangeable clip-heads”) are manufactured from galvanised hot rolled coil (“HRC”). The grade of galvanised HRC is Z275 grade and is of varying thicknesses of 1mm to 2 mm, dependent upon model of clip-head. 


Further information on the goods, including exclusions, can be found in ADN 2024/041. 



Case information 


Abey Australia Pty Ltd  

Tariff Classification 

7326.90.90 (statistical code 60) 


Review Period 

1 April 2023 to 31 March 2024 

Injury Examination Period 

From 1 April 2020 

Contacts for this investigation 

Case Manager:  

Tel: (02) 6213 6000 

Mailing address: 

The Director - Investigations  
Anti-Dumping Commission 
GPO Box 2013 
Canberra ACT 2601 



Key Dates 

Initiation Date 

25 June 2024 

Initial submissions due 

1 August 2024 

PAD* earliest date 

26 August 2024 

If a PAD is not made, a Day 60 Status Report will be published on this day 

Proposals to modify the proposed MCC structure due no later than 

1 August 2024 

SEF* no later than 

14 October 2024 

SEF submissions due 

20 days after publication of SEF 

Final recommendation due no later than 

27 November 2024 

Minister's decision expected 

Within 30 days of receiving the recommendation 

*PAD - Preliminary Affirmative Determination 

**SEF - Statement of Essential Facts   







* Lodgement of Exporter questionnaire is due by: 1 August 2024 

* Lodgement of Importer questionnaire is due by: Part A: 2 July 2024 Part B, C: 16 July 2024 and Part D & E: 23 July 2024