Main content area

Accelerated Review - Dumping

Wind towers from China

The goods the subject of the application (the goods) are:

Certain utility scale wind towers, whether or not tapered, and sections thereof (whether exported assembled or unassembled), and whether or not including an embed being a tower foundation section.

Wind turbines that have electrical power generation capacities equal to or in excess of 1.00 megawatt (MW) and with a minimum height of 50 metres measured from the base of the tower to the bottom of the nacelle (i.e. where the top of the tower and nacelle are joined) when fully assembled.

A wind tower section consists of, at a minimum, multiple steel plates rolled into cylindrical or conical shapes and welded together (or otherwise attached) to form a steel shell, regardless of coating, end finish, painting, treatment or method of manufacture, and with or without flanges, doors, or internal or external components (e.g., flooring/decking, ladders, lifts, electrical junction boxes, electrical cabling, conduit, cable harness for nacelle generator, interior lighting, tool and storage lockers) attached to the wind tower section.

Further information on whether goods are included or excluded can be found in the initiation ADN (linked below).

Case information

Applicant

Penglai Dajin Offshore Heavy Industry Co., Ltd

Tariff Classification

7308.20.00

7308.90.00

8502.31.10

Review Period

1 January 2021 to 31 December 2021

Injury Examination Period

N/A

Contacts for this investigation

Case Manager:

Tel: (03) 8539 2525
Fax: +61 3 8539 2499

E: investigations3@adcommission.gov.au

Mailing address:

The Director - Investigations 3
Anti-Dumping Commission
GPO Box 2013
Canberra ACT 2601

 

Key Dates

Initiation Date

11 March 2022

Initial submissions due

27 May 2022 

Final recommendation due no later than

19 June 2022

Minister's decision expected

Within 30 days of receiving the recommendation

Electronic Public Records