The goods the subject of the application (the goods) are:
Certain utility scale wind towers, whether or not tapered, and sections thereof (whether exported assembled or unassembled), and whether or not including an embed being a tower foundation section.
Wind turbines that have electrical power generation capacities equal to or in excess of 1.00 megawatt (MW) and with a minimum height of 50 metres measured from the base of the tower to the bottom of the nacelle (i.e. where the top of the tower and nacelle are joined) when fully assembled.
A wind tower section consists of, at a minimum, multiple steel plates rolled into cylindrical or conical shapes and welded together (or otherwise attached) to form a steel shell, regardless of coating, endfinish, painting, treatment or method of manufacture, and with or without flanges, doors, or internal or external components (e.g., flooring/decking, ladders, lifts, electrical junction boxes, electrical cabling, conduit, cable harness for nacelle generator, interior lighting, tool and storage lockers) attached to the wind tower section.
Further information on whether goods are included or excluded can be found in the initiation ADN (linked below).
||Keppel Prince Engineering Pty Ltd
||1 January 2017 to 30 June 2018
||Injury Examination Period
|Contacts for this investigation
Tel: (03) 9268 7969
Fax: +61 3 8539 2499
||The Director - Investigations 1
GPO Box 2013
Canberra ACT 2601
||16 July 2018
||Initial submissions due
||22 August 2018
|SEF* no later than
||25 January 2019
||SEF submissions due
||20 days after publication of SEF
|Final recommendation due no later than
||11 March 2019
||Minister's decision expected
||Within 30 days of receiving the recommendation
|Reinvestigation report due on or before
||4 February 2020
|*SEF - Statement of Essential Facts
The public record includes non-confidential versions of documents such as the application, submissions, questionnaire responses, Commission visit reports and letters.