This page belongs to: National Measurement Institute

Mass and density measurement services

We provide the most accurate mass and density measurement services in Australia. We measure mass and density, calibrate instruments and deliver research, advice and training.

We deliver our client services in our Lindfield laboratory, which is accredited by the National Association of Testing Authorities (NATA).

We deliver some services on-site at our clients’ laboratories and facilities around Australia.

Our services include:

  • calibrating and testing reference sets of weights and hydrometers
  • consultancy services including precision measurement, research and development
  • training courses in instrument calibrations and measurement
  • maintaining the national standards for mass and density.

We provide trade measurement calibration services to clients who need accurate measurements for trade measurement, quality assurance and legal purposes.

Calibration services

We calibrate instruments that measure mass and density. This includes standards used by laboratories accredited by the NATA accredited laboratories to calibrate their clients’ instruments. Our calibrations are the most accurate in Australia because we develop and maintain the national standards.

Measurements made with instruments we calibrate provide results traceable to the standards we maintain. This means the results provide international traceability to the Bureau International des Poids et Mesures (BIPM).

Instruments we calibrate

  • reference sets of weights between 0.5 mg and 20 kg
  • industrial reference sets of weights up to 6 tonnes
  • glass density hydrometers
  • pressure hydrometers for use in liquefied petroleum gas (LPG)
  • custom-built instruments for reference use.

We don’t calibrate density hydrometers made of metal. This is because metal hydrometers can’t consistently deliver results with accuracy corresponding to our capabilities. 

For more information email

Mass and density capabilities

We provide comprehensive mass and density capability data to NATA, as part of the accreditation process. The International Organization of Legal Metrology (OIML) defines our weight classes in  OIML International Recommendation 111. For more information about our capabilities see our scope of accreditation on the NATA website.

Calibrating and testing weights

We calibrate sets of weights. Weights submitted to us must meet minimum conditions. The material, construction, finish and general condition must ensure its values don’t change in ambient atmospheric conditions. Weights must:

  • be austenitic stainless steel, nickel-chromium alloy, or other non-magnetic and stable materials
  • integral, i.e. consisting of a single piece of material
  • have smooth surfaces and corners (a high polish is not essential)
  • be well maintained, in good condition and not liable to chemical attack.

We don’t accept weights lacquered or plated with brass or bronze.

Mass capabilities

  • 0.5 ppm for weights of stainless steel, nickel-chromium alloy and other materials with density between 7500 and 8500 kg/m3
  • 5 micrograms for weights of platinum or gold up to a total value of 1 g
  • 1.5 micrograms for aluminium weights up to a total of 0.1 g.

Calibrating and testing hydrometers 

We calibrate glass hydrometers for general use on five points across the scale range. We deliver results up to 1/5 of a scale division for hydrometers with 5 point scales. 

Glass hydrometers must have a sensitivity greater than type M100. The Australian Standards describe these as AS 2026 Density Hydrometer. They must have a serial number and a scale. The scale can list density graduations, specific gravity units, or another recognised scale. These are Brix, Baume, API or percentage alcohol by volume.

Density measurements

We measure the density of liquid and solid samples. Solid samples must be non-porous, and not liable to chemical attack. Our density measurement capabilities are:

  • 1 part in 103  for solid specimens between 5 cm3, under 250 g
  • 3 parts in 105  for solid specimens below 5 cm3 and / or above 250 g
  • 5 parts in 105 for liquid samples.

Typical turnaround times

We liaise with clients to meet their schedule requirements wherever possible, including urgent requirements. Our timeframes depend on the volume of work we have at the time, and the instrument’s complexity or size.

  • 1 day to 2 weeks to calibrate or measure
  • 2 weeks to 2 months wait time, from booking to calibration
  • 1 to 2 weeks to complete the calibration report.

Indicative calibration costs

Our calibrations are for clients who need the highest accuracy possible. This includes other laboratories accredited by NATA. Most NATA accredited laboratories provide results traceable to the standards we maintain. They can deliver results with uncertainties that meet the needs of most clients in Australia, at more competitive rates.

Calibration costs

We customise our service to meet each client’s unique needs, for each instrument. Our costs reflect the time, detail and depth of the service we provide.

Consultancy services

We customise our consultancy services to suit each client’s needs. We work with clients to understand their mass or density measurement needs and provide:

  • precision measurement
  • technical advice on calibration or precision measurement issues
  • consultancy for testing, research and benchmark studies
  • contract research and development for short-term or long-term projects
  • advice for product development, measurement integrity and quality assurance.

Customised training

We design and deliver bespoke training programs for clients. This is separate to our established training and assessment programs in trade measurement, calibrations and measurement. Our bespoke training programs can involve training teams to: 

  • use customised or purpose-built precision mass and density measurement instruments
  • understand traceability and measurement uncertainty, specific to mass and density
  • maintain a quality system.

Was this page helpful?

Was this page useful?

Thank you for your feedback!

Would you like to tell us more about your experiences with this page? (optional)

Feedback you provide will not be directly answered. If you require a reply, please reach out to the page contact directly. For any other queries, please use our general enquiries web form.

Please do not include personal or financial information (e.g. email addresses, phone numbers or credit card details).

Your feedback is covered by our privacy policy.