The Anti-Dumping Commission has been renamed the Australian Trade Remedies Commission. The commission is now responsible for safeguard inquiries.
Read more about the changes.
The Anti-Dumping Commission has been renamed the Australian Trade Remedies Commission. The commission is now responsible for safeguard inquiries.
Read more about the changes.
The goods the subject of the application (the goods) are:
The goods the subject of the application are autoclaved aerated concrete (AAC) blocks or panels, of a minimum thickness of 30 millimetres, of a width not exceeding 620 millimetres, and of lengths up to and including 6,000 millimetres, whether finished or unfinished, of any density, edge profile or face treatment, and in the case of panels, whether or not reinforced with steel or other materials.
Further Information
AAC is a lightweight, precast, cellular concrete building material manufactured by mixing lime, cement, fine aggregate (typically sand or fly ash), aluminium paste, and water into a slurry. The aluminium powder reacts to create hydrogen gas, forming evenly distributed air cells throughout the mixture. The material is then cut to size and cured in an autoclave under high pressure and steam, creating a dimensionally stable product with a characteristic cellular structure.
This manufacturing process gives AAC a recognisable identity across the range of goods: a lightweight, closed-cell cellular concrete, of substantially lower density than normal-weight (dense) concrete, that can be cut and worked with hand tools and that exhibits a porous structure on any cut face. The goods differentiate from one another principally by their form, and secondarily by variations within each form, as described below. A copy of CSR’s product guide is at Non-Confidential Attachment A-4.2.
AAC blocks are small-format, discrete masonry units of solid, unreinforced AAC. They are laid in courses and bedded in adhesive or mortar and are worked in the same manner as traditional masonry. In CSR’s range, the blocks share a common 600mm module and are supplied in thicknesses from 50 mm to 300 mm.
AAC panels are large-format, steel-reinforced spanning elements. They are 600mm wide as standard and are supplied in lengths from 1,200mm upwards. Panels are installed as whole elements. They are fixed vertically to timber or steel framing by means of top hats, brackets and screws, laid over joists, or supported on shelf angles as a facade. The embedded steel reinforcement gives a panel the bending and handling capacity that a block does not possess.
Exclusions
The goods do not include concrete blocks or panels not manufactured through the autoclaved aeration process.
| Case information | |||
|---|---|---|---|
| Applicant | CSR Building Products Limited | Tariff Classification |
6810.11.00 (statistical code 10) 6810.91.00 (statistical code 13) |
| Inquiry Period | 1 July 2025 to 30 June 2026 | Injury Examination Period | 1 July 2022 to 30 June 2026 |
| Contacts for this investigation | Case Manager: E: investigations@atrc.gov.au |
Mailing address | The Director – Investigations Australian Trade Remedies Commission GPO Box 2013 Canberra ACT 2601 |
| Key Dates | |||
|---|---|---|---|
| Initiation Date | 16 November 2026 | Initial submissions due | 23 December 2026 |
| PAD* earliest date | 15 January 2027 | If a PAD is not made, a Day 60 Status Report will be published on this day. | |
| Proposals to modify the proposed MCC structure due no later than | 23 December 2026 | ||
| SEF** no later than | 8 March 2027 | SEF submissions due | 20 days after publication of SEF |
| Final recommendation due no later than | 20 April 2027 | Minister's decision expected | Within 30 days of receiving the recommendation. The final report shall be published following the Minister's decision. |
|
*PAD – Preliminary Affirmative Determination **SEF - Statement of Essential Facts |
|||
| Questionnaires | ||
|---|---|---|
| Exporter | Questionnaire | Questionnaire Spreadsheet |
| Importer | Questionnaire | Questionnaire Spreadsheet |
| * Lodgement of Exporter questionnaire is due by: 23 December 2026 | ||
| * Lodgement of Importer questionnaire is due by: Part A: 23 November 2026, Part B & C: 7 December 2026, D & E: 14 December 2026 | ||
| EPR number | Document type | Title | Date |
|---|---|---|---|
| 3 | Notice - TRN | ||
| 2 | Report | ||
| 1 | Application |