The Anti-Dumping Commission has been renamed the Australian Trade Remedies Commission. The commission is now responsible for safeguard inquiries.
Read more about the changes.
The goods the subject of the application (the goods) are:
Flat rolled products of iron and non-alloy steel of a width equal to or greater than 600mm, plated or coated with aluminium-zinc alloys, not painted, whether or not including resin coating.
Further Information
The amount of aluminium zinc coating on the steel is described as its coating mass and is nominated in grams per metre squared (g/m2) with the prefix being AZ (Aluminium Zinc). Common coating masses used are: AZ200, AZ150, AZ100, AZ70.
The commission understands from previous inquiries that trade and other names often used to describe aluminium zinc coated steel include:
- ZINCALUME® steel
- GALVALUME® steel
- Aluzinc, Supalume, Superlume, ZAM, GALFAN
- Zinc aluminium coated steel
- Aluminium zinc coated steel
- Alu-Zinc Steel sheet in Coils
- Al/Zn
- Hot Dipped 55% Aluminium-Zinc Alloy coated steel sheet in coil.
The goods description covers aluminium zinc coated steel whether or not including any (combination of) surface treatment, for instance; whether passivated or not passivated, (often referred to as chromated or unchromated), resin coated or not resin coated (often referred to as Anti Finger Print (AFP) or not AFP), oiled or not oiled, skin passed or not skin passed.
Painted aluminium zinc coated steel and pre-painted aluminium zinc coated steel are not covered by the measures.
Further information on the goods, including exclusions, can be found in ADN 2026/146 below.
| Case information | |||
|---|---|---|---|
| Applicant | Shandong Shinmade Material Tech Co., Ltd. | Tariff Classification (statistical code) |
7210.61.00 (statistical code 60) 7210.61.00 (statistical code 61) 7210.61.00 (statistical code 62) |
| Inquiry Period | 1 July 2025 to 30 June 2026 | Injury Examination Period | N/A |
| Contacts for this investigation |
Case Manager: Tel: (02) 6102 8092 |
Mailing address | The Director - Investigations 3 Anti-Dumping Commission GPO Box 2013 Canberra ACT 2601 |
| Key Dates | |||
|---|---|---|---|
| Initiation Date | 13 October 2026 | Initial submissions due | 3 November 2026 |
| Final recommendation due no later than | 29 December 2026 | Minister's decision expected | Within 30 days of receiving the recommendation. The final report shall be published following the Minister's decision. |
Electronic Public Records
Page 1 of 1. Showing results from 1 to 2 of 2.
| EPR number | Document type | Title | Date |
|---|---|---|---|
| 2 | Notice - TRN | ||
| 1 | Application |