The goods the subject of the application (the goods) are:
Hot-rolled solid sections of alloy steel, having round or near-round cross-sectional dimensions of not less than 9.5 millimetres (mm) and not greater than 98.5 mm, not in coil.
For the purpose of the description of the goods the subject of this application, alloy steel here means steel containing a chemical composition that at least meets or exceeds the minimum chemical element proportions specified in Note (f) Other alloy steel to Chapter 72 under Schedule 3 of the Customs Tariff Act 1995 (the Tariff) as appearing on the date of this application.
Commonly identified as rod, round bar, engineering bar, spring steel, alloy bar, high alloy bar, silico-manganese bar, grinding rod or bar used for the production of grinding media, the goods covered by this application include all round or near-round hot-rolled solid sections of alloy steel bar meeting the above description of the goods regardless of the particular grade, coating, or minor modification of bar-end finish (including but not limited to, painting or chamfering).
Goods excluded from this application are:
round or near-round hot rolled solid steel sections composed of:
steel reinforcing bar containing indentations, ribs, grooves or other deformations produced during the rolling process;
steel rod in coil;
chromium plated steel; and
solid sections of steel which may be square, rectangular or hexagonal in cross-section.
|Applicant||OneSteel Manufacturing Pty Ltd||Tariff Classification||7228.20.10 (statistical code 44)7228.20.90(statistical code 47)7228.30.10 (statistical code 70)7228.30.90 (statistical code 41)7228.60.10 (statistical code 72)7228.60.90 (statistical code 55)|
|Investigation Period||1 October 2015 to 30 September 2016||Injury Examination Period||From 1 July 2012|
|Contacts for this investigation||Case Manager:Tel: (03) 8539 2477|
Fax: +61 3 8539 2499
|Mailing address:||The Director - Investigations 2|
GPO Box 2013
Canberra ACT 2601
Public Record Documents
The public record EPR 384 includes non-confidential versions of documents such as the application, submissions, questionnaire responses, Commission visit reports and letters.
|Initiation Date||10 January 2017||Initial submissions due||16 February 2017|
|PAD* earliest date||11 March 2017||If a PAD is not made, a Day 60 Status Report will be published on this day|
|SEF* no later than||27 October 2017||SEF submissions due||20 days after publication of SEF|
|Final recommendation due no later than||25 January 2018||Minister's decision expected||Within 30 days of receiving the recommendation|
|Notice of Resumption||2 May 2018||SEF||As soon as practicable|
|SEF published / Investigation resumed||13 November 2018||SEF submissions due||20 days after publication of SEF|
|Final recommendation due no later than||6 February 2019||Minister's decision expected||Within 30 days of receiving the recommendation|
|*PAD - Preliminary Affirmative Determination*SEF - Statement of Essential Facts|
Exporter Questionnaire (DOCX 201KB)
Exporter Questionnaire Spreadsheet (XLSX 55KB)