This feedback is anonymous. Please Contact us if you would like a response.

Main content area

The National Measurement Institute's (NMI) time and frequency measurement services are the most accurate in Australia. We maintain Australia’s official time and frequency dissemination service, and support clients through calibrations, consultancy and training.

We provide services to clients from a broad range of sectors. Our clients are from laboratories, universities, industry and government. This includes clients from other laboratories accredited by the National Association of Testing Authorities (NATA). Our services include:

  • precision instrument calibration and testing
  • time and frequency dissemination
  • consultancy, including advice on quality assurance
  • contract research and development
  • customised training in time and frequency measurement

We deliver our client services in our Lindfield facility. This is the same laboratory where we conduct research and development to develop and maintain the national standards for time and frequency. 

Time and frequency calibration and testing services

We calibrate most reference grade instruments, equipment, systems and standards that measure time and frequency. We calibrate to the national standards which we maintain. Measurements made with instruments we calibrate are traceable to the national and international standards for time.

Instruments and standards we calibrate

  • oscillators
  • counters
  • synthesizers
  • phase meters
  • tachometers
  • stroboscopes 
  • stop watches
  • custom-built devices

For enquiries about calibration email calibration.coordinator@measurement.gov.au.

Time and frequency calibration and testing capabilities

Our uncertainty capabilities are the lowest possible in Australia, which means our calibrations are the most accurate. Our uncertainties are as low as 20 ns for time, and 2·10-13 for frequency.

Our time and frequency measurement capabilities are NATA-accredited. NATA publishes our capabilities as part of the accreditation process. This includes measurement ranges for instruments we calibrate and test, with associated uncertainties of measurement. For more information, see our NATA Scope of Accreditation: NMI Time and Frequency Project

Turnaround times

Times vary depending on demand and complexity. We liaise with clients to meet their schedule requirements wherever possible. Typical timing is:

  • wait time: 2 to 4 weeks
  • turnaround time: 2 to 3 days
  • calibration report: 1 to 2 weeks

Indicative service costs

Our services are for clients who need the highest accuracy possible. This includes other NATA-accredited laboratories. Most NATA accredited laboratories provide results traceable to the national standards. These laboratories can provide a lower-level calibration service that suits the needs of many clients, at more competitive rates. 

We don’t provide a set price list for our calibration services. We customise our service and quotation to meet each client’s needs, for each instrument.

Request a quote for calibration

Time and frequency dissemination service 

We provide Australia’s official time and frequency dissemination service. This is for users who need to know accurate time of day, traceable to Coordinated Universal Time (UTC) Australia (AUS).

Our time and frequency dissemination services are:

  • a global positioning system (GPS) time-transfer system
  • GPS integrity monitoring and reporting
  • network time protocol (NTP) servers
  • dialup synchronisation through the Automated Computer Time Service (ACTS) 

GPS time-transfer

We offer services based on our GPS time-transfer system. This is for clients who need traceable time of day or continuous frequency calibration.

We have 30 NMI GPS time-transfer systems operating throughout Australia and the Asia-Pacific region. Each system combines a GPS timing receiver and computer, with custom data-logging and processing software. The key features of our system are:

  • remote operation via the Internet
  • ability to operate as an NTP server
  • adaptable and customisable to suit client needs 

For more information or a customised quotation, email time@measurement.gov.au or phone +61 2 8467 3501.

GPS integrity monitoring

We monitor and report on GPS satellite signal integrity at our Lindfield facility and around Australia. We measure and report on daily values of UTC(AUS)–GPS time. We publish reports on our file transfer protocol (FTP) server at:

Please note: you cannot access the FTP server using Internet Explorer or Safari web browsers. 

NTP Servers

We operate Network Time Protocol (NTP) servers across Australia. Our NTP servers are traceable to UTC(AUS). We publish traceability data on our FTP server at ftp://time.nmi.gov.au/pub/timedata/ntp.

Users must register their computer for our NTP service, and have a static IP address. Our NTP servers won’t respond to computers with unregistered IP addresses. To register, email time@measurement.gov.au.

Telephone dialup service for synchronising computers

We offer a telephone dial-up service for synchronising computers. This is for clients who can't access our NTP servers through the internet.

Our dialup service uses the Automated Computer Time Service (ACTS) protocol. ACTS doesn't work with digital modems, such as cable, wireless and Digital Subscriber Line (DSL) modems. 

For further information email time@measurement.gov.au.

Consultancy services

We work with clients to understand their measurement issues or opportunities. We deliver services in:

For more information about our consultancy services email info@measurement.gov.au.

Training and education

We provide time and frequency measurement training and education for industry. We offer short-courses through our training and assessment program and deliver bespoke training directly through our laboratory. Our courses cover topics such as:

  • measurement principals and techniques
  • traceability and standards
  • calibrating instruments

We can customise training for individuals or teams including training to use instruments, systems and standards we design and manufacture. 

For more information email info@measurement.gov.au

Read more 

Contact us

Connect with us

See also 

Last updated: 6 June 2019

Content ID: 63537