The goods the subject of the application (the goods) are:

The goods the subject of the application (the goods) are:

Aluminium Extrusions (Surface Finish)

Aluminium Extrusions (Mill Finish)

The goods the subject of the application (the goods) are:

Steel corner/finishing beading and angles, metallic coated, whether or not containing alloys, whether or not drilled, punched, perforated or expanded, of all angle types, of a base metal thickness up to and including 0.49 millimetres, of varying steel grades, with various leg profiles, at various widths and lengths.

Further information

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process.

The goods include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.

The goods the subject of the application (the goods) are:

Hot-rolled rods in coils of steel, whether or not containing alloys, that have maximum cross sections that are less than 14mm. The goods covered include all steel rods meeting the above description regardless of the particular grade or alloy content.

Goods excluded from the measures are:

Hot-rolled deformed steel reinforcing bar in coil form, commonly identified as rebar or debar, and stainless steel in coils.

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process. The goods include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.

The goods the subject of the application (the goods) are:

Black concrete underlay film (also marketed as builders’ film), manufactured from either recycled and/or virgin resins, with a thickness ranging between 150-230 microns, and a width from 1-7 metres.

Further information on the goods, including exclusions, can be found in ADN below.

The goods the subject of the application (the goods) are:

Certain strata reinforcing steel bolts, hollow, made from flat rolled steel, whether or not metallic coated (e.g. galvanised), whether or not containing alloys, with an outside diameter from 44 millimetres up to and including 48 millimetres, of a length from 2.2 metres up to and including 2.5 metres, of a base metal thickness from 2.8 millimetres up to and including 3.4 millimetres, whether or not including the welded ring. 

 

Further information