EPR 221
Goods covered by the application
Wind towers, whether or not tapered, and sections thereof (whether exported assembled or unassembled), and whether or not including an embed being a tower foundation section.
Goods covered by the application
Wind towers, whether or not tapered, and sections thereof (whether exported assembled or unassembled), and whether or not including an embed being a tower foundation section.
Goods Covered by the Investigation
Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process.
The goods covered by this application include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.
Goods Covered by the Investigation
The goods the subject of the application (the goods) are:
Hot rolled rods in coils of steel, whether or not containing alloys, that have maximum cross sections that are less than 14 mm.
The goods covered by this application include all steel rods meeting the above description of the goods regardless of the particular grade or alloy content.
Goods Covered by the Application
Liquid dielectric power transformers with power ratings of equal to or greater than 10 MVA (mega volt amperes) and a voltage rating of less than 500kV (kilo volts) whether assembled or unassembled, complete or incomplete.
Goods Covered by the Application
Polyvinyl chloride homopolymer resin (PVC). PVC is a white powder produced by the polymerisation of vinyl chloride monomer ("VCM"). PVC can be manufactured through a suspension process or a mass process, and the final goods are considered to be similar and interchangeable.
Paste (or emulsion), compound grades and recycled PVC are excluded from the measures.
Goods covered by the application
PVC is a white free flowing powder that is used in combination with other chemicals to produce a variety of products. PVC is sold to a range of processors who extrude, inject, mould or blow mould the PVC to make a wide variety of goods. The major end-use of PVC based products is in the building and construction sector (e.g. pipes and fittings, cables, house cladding, gutters, down pipes, flooring and window frames). PVC based products are also used in packaging, upholstery and domestic appliances.
Goods Covered by the Investigation
Newsprint in roll or sheet form having a weight within the range 40 grams per square meter (gsm) to 46 gsm (inclusive) and brightness below a measure of 70 ISO.
Case Information |
|
---|---|
Case Type |
Dumping Investigation |
Initiation Date |
22 April 2014 |
Applicant |
Norske Skog Australasia Pty Limited |
The goods subject to anti-dumping measures, in the form of a dumping duty notice are:
Hot rolled structural steel sections in the following shapes and sizes, whether or not containing alloys:
Goods Covered by the Application
Hot rolled structural steel sections in the following shapes and sizes, whether or not containing alloys:
universal beams (I sections), of a height greater than 130mm and less than 650mm;
universal columns and universal bearing piles (H sections), of a height greater than 130mm and less than 650mm;
channels (U sections and C sections) of a height greater than 130mm and less than 400mm; and
Goods Covered by the Investigation
The goods subject of the application (the goods) are flat rolled products of:
Iron;
Non-alloy steel; or
Non-heat treated alloy steel of a kind commonly referred to as Quench and Tempered (Q&T) Green Feed;
of a width greater than 600mm, with a thickness equal to or greater than 4.75mm, not further worked than hot rolled, not in coils, with or without patterns in relief.
The following goods excluded from the investigation: