565

The goods the subject of the application (the goods) are:

[a]mmonium nitrate, prilled, granular or in other solid form, with or without additives or coatings, in packages exceeding 10kg.

Further information on whether goods are included or excluded can be found in the initiation ADN (linked below).

Case information      
Applicant

CSBP Limited

Orica Australia Pty Ltd

Queensland Nitrates Pty Ltd

546

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process. The goods include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.

The goods subject to the anti-dumping measures do not include:

487

The goods the subject of the application (the goods) are:

Certain utility scale wind towers, whether or not tapered, and sections thereof (whether exported assembled or unassembled), and whether or not including an embed being a tower foundation section.

Wind turbines that have electrical power generation capacities equal to or in excess of 1.00 megawatt (MW) and with a minimum height of 50 metres measured from the base of the tower to the bottom of the nacelle (i.e. where the top of the tower and nacelle are joined) when fully assembled.

489

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process.

The goods covered by this application include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.

EPR 418

Goods Covered by the Investigation

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process.The goods covered by this application include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.Goods excluded from this application are plain round bar, stainless steel and reinforcing mesh.