The goods the subject of the application (the goods) are:

Aluminium extrusions that:

 

The goods the subject of the application (the goods) are:

Aluminium extrusions that:

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process. The goods include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.

Case no. 656

Investigation Type – Dumping and Subsidy Investigation 

Goods: Clear Laminate Glass 

The goods the subject of the application (the goods) are:

Clear Laminate Glass (CLG) in actual thickness of between 5 and 13 millimetres (mm). All CLG within this thickness range is included.

The goods the subject of the application have the following characteristics:

The goods the subject of the application (the goods) are:

Steel corner/finishing beading and angles, metallic coated, whether or not containing alloys, whether or not drilled, punched, perforated or expanded, of all angle types, of a base metal thickness up to and including 40 millimetres, of varying steel grades, with various leg profiles, at various widths and lengths.

Further information

The goods the subject of the application (the goods) are:

Silicon metal containing: 

• at least 96.00 per cent but less than 99.99 per cent silicon by weight; and
• between 89.00 per cent and 96.00 per cent silicon by weight that contains aluminium greater than 0.20 per cent by weight; 

of all forms (i.e. lumps, granules, or powder) and sizes. 

Further information on the goods, including exclusions, can be found in ADN 2024/042.

The goods the subject of the application (the goods) are:

Deep drawn stainless steel sinks with a single deep drawn bowl having a volume of between 7 and 70 litres (inclusive), or multiple drawn bowls having a combined volume of between 12 and 70 litres (inclusive), with or without integrated drain boards, whether finished or unfinished, regardless of type of finish, gauge, or grade of stainless steel and whether or not including accessories; 

The goods the subject of the application (the goods) are:

The goods the subject of the application (the goods) are:

Hot rolled structural steel sections in the following shapes and sizes, whether or not containing alloys:

Certain aluminium zinc coated steel that is: 

• a flat rolled product of iron and non-alloy steel; 
• plated or coated with aluminium-zinc alloys; 
• whether or not surface treated including combinations of surface treatments; and 
• whether or not including resin coating. 

Sizes 

in widths equal to or greater than 600mm.

Further information on the goods, including exclusions, can be found in ADN 2024/012 below.