The goods the subject of the application (the goods) are:
Uncoated white paper of a type used for writing, printing or other graphic purposes, in the nominal basis weight range of 67 to 100 gsm (grams per square metre) and cut to sheets of metric size A4 (210mm x 297mm) (also commonly referred to as cut sheet paper, copy paper, office paper or laser paper).
Further information on the goods can be found in ADN below.
|
Case information |
|---|
The goods the subject of the application (the goods) are:
Clear float glass (CFG) in nominal thicknesses of 3 to 12 millimetres (mm).
The tolerances for each of these thicknesses are set out in the following table.
| Nominal thickness (mm) | Acceptable tolerances (mm) | |
|---|---|---|
| Minimum | Maximum | |
|
3 |
2.80 |
3.50 |
|
4 |
3.51 |
4.50 |
Except by PT. Indah Kiat Pulp & Paper Tbk, PT. Pabrik Kertas Tjiwi Kimia Tbk & PT. Pindo Deli Pulp & Paper Mills
The goods the subject of the application (the goods) are:
uncoated white paper of a type used for writing, printing or other graphic purposes, in the nominal basis weight range of 70 to 100 gsm and cut to sheets of metric size A4 (210 mm x 297 mm) (also commonly referred to as cut sheet paper, copy paper, office paper or laser paper).
Exported by: PT Indah Kiat Pulp & Paper TBK and PT Pindo Deli Pulp & Paper Mills
The goods the subject of the application (the goods) are:
Uncoated white paper of a type used for writing, printing or other graphic purposes, in the nominal basis weight range of 70 to 100 gsm and cut to sheets of metric size A4 (210mm x 297mm).
Goods covered by the application
Flat rolled products of:
iron;
non-alloy steel; or
non-heat treated alloy steel of a kind commonly referred to as Quench and Tempered (Q&T) Green Feed;
of a width greater than 600mm, with a thickness equal to or greater than 4.75mm, not further worked than hot rolled, not in coils, with or without patterns in relief.
The following goods excluded from the investigation:
