The goods the subject of the application (the goods) are:

Certain utility scale wind towers, whether or not tapered, and sections thereof (whether exported assembled or unassembled), and whether or not including an embed being a tower foundation section.

Wind turbines that have electrical power generation capacities equal to or in excess of 1.00 megawatt (MW) and with a minimum height of 50 metres measured from the base of the tower to the bottom of the nacelle (i.e. where the top of the tower and nacelle are joined) when fully assembled.

The goods the subject of the application (the goods) are:

The goods the subject of the application (the goods) are:

The goods the subject of the application (the goods) are:

Ferrous grinding balls, whether or not containing alloys, cast or forged, with diameters in the range 22mm to 170mm (inclusive).

The goods covered include all ferrous grinding balls, typically used for the comminution of metalliferous ores, meeting the above description of the goods regardless of the particular grade or alloy content.

Goods excluded include stainless steel balls, precision balls that have been machined and/or polished, and ball bearings.

The goods the subject of the application (the goods) are:

The goods the subject of the application (the goods) are:

Exported from: China, Korea, Malaysia and Taiwan

The goods the subject of the application (the goods) are:

The goods subject to the anti-dumping measures and this inquiry are:

 Silicon metal containing:

• at least 96.00 per cent but less than 99.99 per cent silicon by weight; and
• between 89.00 per cent and 96.00 per cent silicon by weight that contains aluminium greater than 0.20 per cent by weight;

of all forms (i.e. lumps, granules, or powder) and sizes.

Goods Covered by the Investigation

In relation to China, Korea and Taiwan, the goods description is:

Flat rolled products of iron and non-alloy steel of a width less than 600mm and, equal to or greater than 600mm, plated or coated with zinc and

Flat rolled iron or steel products containing alloys of a width less than 600mm and, equal to or greater than 600mm, plated or coated with zinc exported from: