The goods the subject of the application (the goods) are:
Black concrete underlay film (also marketed as builders’ film), manufactured from either recycled and/or virgin resins, with a thickness ranging between 150-230 microns, and a width from 1-7 metres.
Further information on the goods, including exclusions, can be found in ADN below.
The goods the subject of the application (the goods) are:
Hot rolled coil steel (including in sheet form), with or without patterns in relief (known as checker plate), whether or not containing alloys, not clad, plated or coated (other than oil coated).
Further information on the goods, including exclusions, can be found in ADN below.
The goods the subject of the application (the goods) are:
The goods the subject of the application (the goods) are:
The goods, being the subject of the application (the goods) are:
Hot-rolled deformed steel reinforcing bar, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process.
Further information:
The goods include all steel reinforcing bar meeting the above description regardless of the particular grade, alloy content, coating or length.
Exclusions:
The goods the subject of the application (the goods) are:
“Interchangeable bolted clipping system clip-heads, with galvanized or powder coating finish, in the size range 12 to 150 mm (i.e. 0.5 inch to 6 inch) diameter, with elongated emboss and square hole for interlocking coach bolt and nut.”
Supporting physical appearance information
The goods the subject of the application (the goods) are:
Interchangeable bolted clipping system brackets, whether or not galvanized, whether or not including nut and bolt, including the following brackets:
The goods the subject of the application (the goods) are:
Hot-rolled rods in coils of steel, whether or not containing alloys, that have maximum cross sections that are less than 14mm. The goods covered include all steel rods meeting the above description regardless of the particular grade or alloy content.
Goods excluded from the measures are:
Hot-rolled deformed steel reinforcing bar in coil form, commonly identified as rebar or debar, and stainless steel in coils.
The goods the subject of the application (the goods) are:
Ferrous grinding balls, whether or not containing alloys, cast or forged, with diameters in the range 22mm to 170mm (inclusive).
The goods covered include all ferrous grinding balls, typically used for the comminution of metalliferous ores, meeting the above description of the goods regardless of the particular grade or alloy content.
Goods excluded include stainless steel balls, precision balls that have been machined and/or polished, and ball bearings.
