References and further reading

Bollhöfer, A, Storm, J, Martin, P & Tims, S 2006, ‘Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia’, Environmental Monitoring and Assessment, vol. 114, nos 1–3, pp. 313–330.

British Standards Institution 2008, BS 6472.1:2008, Guide to evaluation of human exposure to vibration in buildings. Vibration sources other than blasting, British Standards Institution.

—1993, BS 7385–2:1993. Evaluation and measurement for vibration in buildings. Guide to damage levels from groundborne vibration, British Standards Institution.

Clarke, T 2008, ‘Barnett: Esperance lead pollution still a major concern’, WA Today, 10 November 2008, viewed 30 August 2009, barnett-esperance-lead-pollution-still-a-major-concern-20081110-5lg9.html.

Department of the Environment, Water, Heritage and the Arts 2009a, National Pollutant Inventory, viewed 30 August 2009,

—2009b, Protecting people from the impact of uranium mining, viewed 30 August 2009,

Department of Industry, Tourism and Resources 2008a, Mine closure and completion, Leading Practice Sustainable Development Program for the Mining Industry, DITR, Canberra.

—2008b, Mine rehabilitation, Leading Practice Sustainable Development Program for the Mining Industry, DITR, Canberra.

—2006, Community engagement and development, Leading Practice Sustainable Development Program for the Mining Industry, DITR, Canberra.

Department of Resources, Energy and Tourism 2009, Evaluating performance: monitoring and auditing, Leading Practice Sustainable Development Program for the Mining Industry, DRET, Canberra.

—2008, Risk assessment and management, Leading Practice Sustainable Development Program for the Mining Industry, DRET, Canberra.

Deutsches Institut für Normung e.V., DIN 4150–3:1999–02, Vibration in buildings—Part 3: effects on structures, DIN.

DEWHA—see Department of the Environment, Water, Heritage and the Arts.

DITR—see Department of Industry, Tourism and Resources.

DRET—see Department of Resources, Energy and Tourism.

Environment Protection Authority Victoria 2007, ‘Noise surveys 2007’, accessed 30 August 2009,

—2006, Draft protocol for environmental management—mining and extractive industry, accessed 21 September 2009,

Environmental Protection and Heritage Council 2009, National Environment Protection Measures (NEPMs) explained, accessed 21 September 2009,

—2003, Variation to the National Environment Protection (Ambient Air Quality) Measure, EPHC, 7 July 2003.

EPA—see Environment Protection Authority Victoria.

EPHC—see Environmental Protection and Heritage Council.

Hassall, JR & Zaveri, K 1979, Acoustic noise measures, Brüel & Kjær.

Holmes, N & Lakmaker, S 2009, Meteorological modelling for the Hunter Valley, ACARP research project C12036. Australian Coal Association Research Program.

International Organization for Standardization 2003, ISO 2631–2:2003 Mechanical vibration and shock—evaluation of human exposure to whole body vibration—Part 2: Vibration in buildings (1 Hz to 80 Hz), ISO.

—1988, ISO 6395:1988 Acoustics—measurement of exterior noise emitted by earth-moving machinery—dynamic test conditions, ISO.

—1993, ISO 9614–1:1993 Acoustics—determination of sound power levels of noise sources using sound intensity—Part 1: measurement at discrete points, ISO.

—1978, ISO 4872:1978 Acoustics—measurement of airborne noise emitted by construction equipment intended for outdoor use method for determining compliance with noise limits, ISO.

ISO—see International Organization for Standardization.

Jones, H 1980, ‘Development of an in-pit dust suppression system for haul roads’, BHP technical bulletin, vol. 24, 2 November 1980, pp. 32–26.

Quarry, 2007, Quarry, Institute of Quarrying Australia, November.

Queensland Environmental Protection Agency 2006, Guideline—Noise, Noise and vibration from blasting, Queensland Government, March 2006.

Safe, M 2009, ‘Bad vibrations’, The Australian, 26 January 2009.

Safework Australia 2009, Safe design, viewed 30 August 2009, http://

Sharland, I 1972, Woods practical guide to noise control, Woods Acoustics, Colchester.

Siskind, DE, Stagg, MS, Kopp, JW & Dowding, CH 1980, ‘Structure response and damage produced by ground vibrations from surface mine blasting’, United States Bureau of Mines Research Investigation RI–8507.

Standards Australia 2006, AS 2187.2-2006 Explosives—storage and use—use of explosives, Standards Australia.

—1990, AS 2670.2–1990 Evaluation of human exposure to whole-body vibration— continuous and shock-induced vibration in buildings (1 to 80 Hz), Standards Australia.

Thompson, RJ & Visser, AT 2006, ‘Selection and maintenance of mine haul road wearing course materials’. Mining Technology: Transactions of the Institutions of Mining and Metallurgy, vol. 115, no. 4, section A, pp. 140–153.

—2002, ‘Benchmarking and managing surface mine haul road dust emissions’, Transactions of the Institute of Mining and Metallurgy (UK), Section A, p. 113.

—2000, ‘The reduction of the safety and health risk associated with the generation of dust on strip coal mine haul roads’, Safety in Mines Research Advisory Committee, Collieries Sub-committee Final Report, Project COL 467, Pretoria, South Africa.

Vaughan, M, Hall, E, Varga, D, Billing, G & McSweeney, K 2007, ‘Blast improvements with electronics at Sunrise Dam Gold Mine’, paper presented at the EXPLO Conference, Wollongong, New South Wales, 3–4 September 2007.

Share this Page