The goods the subject of the application (the goods) are:
Certain utility scale wind towers, whether or not tapered, and sections thereof (whether exported assembled or unassembled), and whether or not including an embed being a tower foundation section.
Wind turbines that have electrical power generation capacities equal to or in excess of 1.00 megawatt (MW) and with a minimum height of 50 metres measured from the base of the tower to the bottom of the nacelle (i.e. where the top of the tower and nacelle are joined) when fully assembled.
A wind tower section consists of, at a minimum, multiple steel plates rolled into cylindrical or conical shapes and welded together (or otherwise attached) to form a steel shell, regardless of coating, end finish, painting, treatment or method of manufacture, and with or without flanges, doors, or internal or external components (e.g., flooring/decking, ladders, lifts, electrical junction boxes, electrical cabling, conduit, cable harness for nacelle generator, interior lighting, tool and storage lockers) attached to the wind tower section.
Further information on whether goods are included or excluded can be found in the initiation ADN (linked below).
||Suzhou Titan New Energy Technology Co Ltd
||1 October 2018 to 30 September 2019
||Injury Examination Period
|Contacts for this investigation
Tel: +61 3 8539 2419
Fax: +61 3 8539 2499
||The Director - Investigations 1
GPO Box 2013
Canberra ACT 2601
4 December 2019
|Initial submissions due
||23 January 2020
|Final recommendation due no later than
13 March 2020
|Minister's decision expected
Within 30 days of receiving the recommendation