The goods the subject of the application (the goods) are:
Solid base angle, made from hot rolled coil steel, alloyed or non-alloyed, cold roll-formed, whether or not galvanised.
The subject goods are typically described as solid base angle or Budabar or B-bar or ribbed angle lintel or L-section and are typically used as lintels.
The goods are generally supplied in section sizes being nominally 100mm x 100mm x 6mm or 150mm x 100mm x 6mm ranging in length from 900mm to 4,000mm.
Goods not covered by this application include T-bar, flat bar, perforated bar (e.g. Rendabar), and hot rolled sections; goods made from hot rolled coil steel that are subsequently subject to a further hot rolling process.
Further information on whether goods are included or excluded can be found in the initiation ADN (linked below).
Galintel Pty Ltd (Galintel)
7216.61.00 (statistical code 57)
7228.70.00 (statistical code 12)
7308.30.00 (statistical code 07)
7308.90.00 (statistical code 64)
|Investigation Period||1 January 2018 to 31 December 2018||Injury Examination Period||From 1 January 2015|
|Contacts for this investigation|
Tel: +61 3 8539 2451
Fax: +61 3 8539 2499
|Mailing address:||The Director - Investigations 2|
GPO Box 2013
Canberra ACT 2600
|Initiation Date||26 February 2019||Initial submissions due||4 April 2019|
|PAD* earliest date||27 April 2019||If a PAD is not made, a Day 60 Status Report will be published on this day|
|SEF* no later than||17 June 2019||SEF submissions due||20 days after publication of SEF|
|Final recommendation due no later than||31 July 2019||Minister's decision expected||Within 30 days of receiving the recommendation|
|*PAD - Preliminary Affirmative Determination*SEF - Statement of Essential Facts|
The public record includes non-confidential versions of documents such as the application, submissions, questionnaire responses, Commission visit reports and letters.